Product catalog

TVV/1R – Glass fiber RS232 repeater – Low voltage

0,00 

TVV/1R is an industrial glass optical fiber repeater with Bayonet connector and RS232 output, powered by a low voltage supply.

It accepts a wide range of AC and DC voltages, and it is completely Plug&Play, since it does not need any driver nor DIP switch. This optical fiber serial repeater is Full Duplex and it automatically detects the transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

Thanks to its compact 2-module DIN rail housing, it can be easily mounted in an electrical panel.

SKU: TVV/1R Category: Tags: , , , ,
Request information
Description

TVV/1R is an industrial glass optical fiber repeater with Bayonet connector and RS232 output, powered by a low voltage supply. It can be used to increase the transmission distance of a serial communication, or to isolate different branches of a network. Thanks to its compact 2-module DIN rail housing, it can be easily mounted in an electrical panel. It accepts a wide range of AC and DC voltages, and it is completely Plug&Play, since it does not need any driver nor DIP switch. This optical fiber serial repeater is Full Duplex and it automatically detects the transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

 

Working principle

TVV/1R is composed of a master optical section, where the received signal is repeated to the slave optical section. The signal is simultaneously converted and transmitted to the slave RS232 electrical section. Any response packet received from the slave terminals is transmitted back to the master terminals. However, the response packets are not converted by the slave RS232 electrical section.

 

Use cases

Optical repeaters are typically used to integrate a section of optical fiber in a RS232 low voltage network, in order to increase the transmission distance. They isolate the different branches of a network from electromagnetical interferences (EMI) and voltage surges, like the different floors of a hotel, or various branches of a solar power system. Electromagnetical interferences are fairly common in these environments, so it is good practice to integrate two or more optical-electrical converter to guarantee signal integrity. Furthermore, there are environments where electrical devices are strictly forbidden, such as pools, saunas, fire-risk buildings, so optical fiber is mandatory.

 

Versatility

Optical-electrical serial repeaters are available with different combinations of serial standard and optical fiber, or as simple converters. TSS/1R and TQQ/1R repeaters for example accept synthetic optical fiber with screw connector, or synthetic optical fiber with VersaLink connector, respectively. TVV/1F and TVV/1M are suitable for different serial standards, that is RS422 and RS485. Industrial serial converter CRM/1V can be used to terminate an optical bus. Every combination of serial standard, optical fiber, and power supply, is however available, while special requests (such as higher data rates) can be made via the contact form.

Technical Specifications

Main features

Power supply

9 – 24 V AC 48/62 Hz

9 – 30 V DC

Power consumption

1 W

Serial transmission data rate

0 – 250 kbps (automatic) – higher data rates on request

RS232

Communication type

Full duplex

RX input voltage

1.5 V low input threshold – 1.8 V high input threshold (± 25 V max)

TX output voltage

± 5 V (± 5.4 V max)

ESD performance RX / TX

± 15 kV (Human Body Model) – ± 8 kV IEC61000-4-2 contact discharge

Bayonet ST (Straight Tip)

Optical fiber type

Glass: 50 / 125 μm – 62.5 / 125 μm

Maximum transmission distance

2000 m

Mechanical features

DIN Rail

2 modules

Dimensions

90 mm x 36 mm x 57 mm

Weight

83 g

Working conditions

Degree of protection

IP20

Operating temperature

-20 °C to +50 °C

Storage temperature

-40 °C to +80 °C