Product catalog

CFP/1V – RS422-glass fiber converter – Mains voltage

0,00 

CFP/1V is an industrial optical-electrical converter, RS422 to glass optical fiber with Bayonet connector, powered by mains voltage 230 V supply.

It accepts the standard 230 V mains voltage, and it is completely Plug&Play, since it does not need any driver nor DIP switch. This RS422 serial converter is Full Duplex and it automatically detects the transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

Thanks to its compact 2-module DIN rail housing, it can be easily mounted in an electrical panel.

SKU: CFP/1V Category: Tags: , , , , ,
Request information
Description

CFP/1V is an industrial optical-electrical converter, RS422 to glass optical fiber with Bayonet connector, powered by mains voltage 230 V supply. It can be used to increase the transmission distance of a serial communication, or to isolate different branches of a network. Thanks to its compact 2-module DIN rail housing, it can be easily mounted in an electrical panel. It accepts the standard 230 V mains voltage, and it is completely Plug&Play, since it does not need any driver nor DIP switch. This RS422 serial converter is Full Duplex and it automatically detects the transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

 

Use cases

Optical-electrical converters are typically used to integrate a section of optical fiber in a RS422 low voltage network, in order to increase the transmission distance. They isolate the different branches of a network from electromagnetical interferences (EMI) and voltage surges, like the different floors of a hotel, or various branches of a solar power system. Electromagnetical interferences are fairly common in these environments, so it is good practice to integrate two or more optical-electrical converter to guarantee signal integrity. Furthermore, there are environments where electrical devices are strictly forbidden, such as pools, saunas, fire-risk buildings, so optical fiber is mandatory.

 

Versatility

Optical-electrical converters are available with different combinations of serial standard and optical fiber, or powered by AC and DC low voltage. CFP/1Q and CFP/1S converters for example accept synthetic optical fiber with VersaLink connector, or synthetic optical fiber with screw connector, respectively. CRP/1V and CMP/1V are suitable for different serial standards, that is RS232 and RS485. Industrial serial converter CFM/1V is functionally identical to CFP/1V, but it is powered by AC and DC low voltage. Every combination of serial standard, optical fiber, and power supply, is however available, while special requests (such as higher data rates) can be made via the contact form.

Technical Specifications

Main features

Power supply

230 V AC 48/62 Hz

Power consumption

1 W

Serial transmission data rate

0 – 250 kbps (automatic) – higher data rate on request

RS422

Communication type

Full Duplex on a balanced line

Maximum bus voltage

± 60 V – ESD ± 16.5 kV (Human Body Model)

Common mode range

± 25 V DC

Slew rate

Limited, to have an error-free transmission

Bayonet ST (Straight Tip)

Optical fiber type

Glass: 50 / 125 μm – 62.5 / 125 μm

Maximum transmission distance

2000 m

Mechanical features

DIN Rail

2 modules

Dimensions

90 mm x 36 mm x 57 mm

Weight

83 g

Working conditions

Degree of protection

IP20

Operating temperature

-20 °C to +50 °C

Storage temperature

-40 °C to +80 °C