Product catalog

BMC/1 – USB-RS485 converter – Self-powered

0,00 

BMC/1 is an industrial electrical converter, USB to RS485 serial standard with Mini XLR connector, 5 V-self-powered via Type A USB port.

On the PC, the USB device is seen as a RS232 port (VCP, Virtual COM Port), and it does not need any DIP switch. This USB-RS485 serial converter is Half Duplex and it automatically detects data direction and transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

The Operating System should automatically detect the device and install the necessary drivers, which can also be downloaded here.

SKU: BMC/1 Category: Tags: , , , ,
Request information
Description

BMC/1 is an industrial electrical converter, USB to RS485 serial standard with Mini XLR connector, 5 V-self-powered via Type A USB port. It can be used to allow a PC to communicate with a RS485 network. This converter is powered via the Type A USB, so there is no need to use an external power supply. The Operating System should automatically detect the device and install the necessary drivers, which can also be downloaded here. On the PC, the USB device is seen as a RS232 port (VCP, Virtual COM Port), and it does not need any DIP switch. This USB-RS485 serial converter is Half Duplex and it automatically detects data direction and transmission data rate up to 250 kbps, so it can be easily installed in any new or existing network.

 

Use cases

USB converters are typically used to allow the communication of a PC with a RS485 network, or to increase the transmission distance. In a wide RS485 bus, like an industrial environment or a solar power system, it is recommended to use an isolated converter, in order to protect against voltage surges. In a heavily disturbed network, such as industrial environment, it is good practice to integrate two or more optical-electrical converter to guarantee signal integrity. Furthermore, there are environments where electrical devices are strictly forbidden, such as pools, saunas, fire-risk buildings, so optical fiber is mandatory.

 

Versatility

USB-serial converters are available also with isolation, with different combinations of serial standard, or with other connectors. BLM/1 and BMM/1 converters for example use screw terminals, with isolated and non-isolated RS485, respectively. BTS/1 and BTV/1 come with synthetic or glass optical fiber, to isolate against electromagnetic interferences. Industrial serial converters BFM/1 and BFC/1 work with RS422 serial standard, with screw terminals or 5-pins Mini XLR connector. Every combination of serial standard, optical fiber, and power supply, is however available, while special requests (such as higher data rates) can be made via the contact form.

Technical Specifications

Main features

Power supply

USB

Power consumption

1 W

Serial transmission data rate

0 – 250 kbps (automatic) – higher data rates on request

USB

Connector

USB type A

Technology

USB 2.0, USB 1.1

Interface type

VCP (Virtual COM Port) based on RS232

Data direction

Full Duplex

Supported operating systems

Windows 98 and above, Mac OS 8 and above, Linux

RS485

Communication type

Half Duplex on a balanced line, with automatic data direction

Maximum bus voltage

± 60 V – ESD ± 16.5 kV (Human Body Model)

Common mode range

± 25 V DC

Slew rate

Limited, to have an error-free transmission

Mechanical features

Dimensions

90 mm x 50 mm x 25 mm

Working conditions

Degree of protection

IP20

Operating temperature

-20 °C to +50 °C

Storage temperature

-40 °C to +80 °C

Manufacturer website
FTDI driver